Texture Wall Paint Limestone special rock slices feel smooth Stain-resistant and rub-resistant high-grade residential
Product Introduction
Basalt is a natural and simple scraping diatom art paint. The product has the characteristics of super hardness, wear resistance, scrub resistance, mildew resistance and antibacterial. Its texture is flat and the surface has rock flakes. The effect is fashionable and atmospheric, which is very suitable for high-end home space decoration.
Product Features
1. Efficient decomposition of formaldehyde (formaldehyde purification performance ≥ 90%)
2. Release negative oxygen ions (continued release of 1000-2000/cm³)
3. Smoking deodorization
4. Moisture absorption and moisture resistance
5. Antibacterial and mildew resistance (I-level antibacterial, 0-level mildew resistance)
6. Stain resistance and rub resistance (I-level anti-stain, washing resistance ≥ 6000 times)
7. Odor-free and environmentally friendly
8. Artistic texture: The surface has special rock flakes, and the texture is like the surface of the moon with small rock holes, calm and restrained, simple and atmospheric, and smooth to the touch.
Product Use
Suitable for special effect decoration of indoor walls of various buildings such as high-end residences, villas, hotels, clubs, venues, office buildings, public areas, etc.
Technical parameters
Theoretical dosage: about 1㎡/2kg/2 coats of finished product. The actual construction area will vary due to different personal construction techniques and processes.
Dilution ratio: about 25% water is used for mixing, which may vary slightly according to the actual construction situation.
Drying time: The drying time varies according to the actual construction process.
Maintenance time: 7 days/25℃, which can be extended at low temperature (not lower than 5℃) to obtain the ideal coating effect.
Implementation standard: GB18582-2020 "Limits of Hazardous Substances in Wall Coatings for Buildings".
Product specifications: 20KG/barrel.
Shelf life: See product label.
Usage method
Construction method: batch coating, etc.
Construction tools: material tray, palette knife, masking paper, short-hair roller, medium-flowered nap roller, brush, batch knife, etc.
Construction process: ①Roll and apply 1 coat of penetrating sealing primer, wait until it is completely dry;
②Apply 1 coat of basalt by scraping, wait until it is completely dry;
③Apply 2 coats of basalt by scraping, and immediately roughen the surface;
④When it is 60% dry, finish the surface and wait until it is completely dry;
⑤Roll and apply 1 coat of inorganic diamond cover topcoat.
Construction environment: It is not suitable to apply when the temperature is below 5℃ or the relative humidity is above 80%.
Base treatment: Before construction, clean the surface of the base to be painted to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as ash sand, plaster, cement, etc. (pH value is less than 10, moisture content is less than 10%) should be dried before construction.
During construction, please configure necessary protective and labor protection supplies according to local operating specifications, such as protective glasses, gloves and professional construction clothes.
Before construction, stir thoroughly and use in a certain proportion. The mixing container must be clean and free of other chemical substances.
Please use clean water to clean the equipment in time during and after construction.
Precautions
If the product leaks, it can be covered with sand or soil for absorption.
For the treatment of pollutants after absorption, including cans and unused containers, they should be handled in accordance with local environmental protection standards.
Never discharge discarded paint waste into drains or water sources.
If this product accidentally enters your eyes when using it, please rinse with clean water in time. If you feel uncomfortable, please seek medical treatment in time.
In order to better protect the legitimate rights and interests of users, please do not purchase products with incomplete labels and beware of counterfeiting.
For any unknown information, please ask the local dealer for the product manual.
Storage conditions
Store in a closed place at 5℃~35℃ in a cool and dry place, strictly prevent frost and avoid sunlight.
Product Tags:
|
|
Texture Wall Paint Limestone special rock slices feel smooth Stain-resistant and rub-resistant high-grade residential Images
|
